DAGRADATION PROCESS
Biodegradable bags refer to plastic bags that can be completely degraded under specific conditions. They are usually made of biodegradable materials such as polylactic acid (PLA) and polyester (PBAT), which reduce their stability during production and make them easier to degrade in the natural environment without residues.
Compared with ordinary plastic bags, biodegradable bags have the advantages of environmental protection and sustainability. The degradation process refers to the decomposition of polymer molecules into small molecules through microbial action, hydrolysis, oxidation, and other methods, ultimately forming natural substances such as carbon dioxide, water, and organic matter. The degradation products are carbon dioxide and water, which can be directly absorbed by plants in the soil, returned to the soil, or entered the general environment, and can be degraded without polluting the environment.
RAW MATERIAL
MODIFIED MATERIALS
Modified Material
Film Blowing Grade YPMH-S200
Film Blowing Grade PLA Modified Material
PLA+PBAT+STARCH
Item Code: YPMH-S200
Recommended application
Shopping vest bag, wrist bag, roll bag, food preservation bag; Electronic product packaging film, household
Appliance packaging film, medical hygiene film, etc.
Product characteristics
1) Good coloring performance, stable melt strength, and can be directly processed into various films;
2) It is usually light white or light yellow, has fragrance, is easy to be decomposed by microorganisms, and has natural antistatic property;
3) Good heat stability of raw materials, good recyclability of leftover materials, high temparature and strong shear force;
4) This product has low moisture content. It is vacuum packed and can be used after opening.
Material properties
| Item |
Test method |
Conditions for item |
Unit |
Result[1] |
| Melt flow rate |
1S0 1133 |
190ºC, 2.16kg |
g/10min |
4.0-7.0 |
| Density |
1S0 1183 |
23ºC |
g/cm3 |
1.27-1.32 |
| Melting point |
DSC |
-
- |
ºC |
110-130 |
[1]The above data are measured values, not guaranteed values.
Processing parameters
| Temperature |
Typical value[2] |
Reference range |
| Melting temperature |
|
120ºC |
115-125ºC |
| Temperature of film blowing heating area |
Posterior segment |
025ºC |
120-130ºC |
| Middle segment |
130ºC |
125-135ºC |
| Anterior segment |
135ºC |
130-140ºC |
| Mould head temperature |
|
135ºC |
130-140ºC |
| Upper limit of processing temperature |
|
180ºC |
|
[2]The above data are typical values and aer only for reference. In the actual processing process, the parameters can be adjusted appropriately.
Typical film properties[3]
| Characteristics[4] |
Test method |
Conditions for testing |
Unit |
Typical values[5] |
| Tensile strength longitudinal/transverse |
1S0 527 |
25ºC |
MPa |
21/12 |
| Elongation at break longitudinal/transverse |
1S0 527 |
25ºC |
% |
250/600 |
| Dart impact |
1S0 7765-1 |
25ºC |
g
|
150 |
[3]Typical film are produced by film blowing mechanism with the material YPMH-M300, film thickness is 28 microns;
[4]The data are measured by the newly produced film and can not be used as the basis for judging material quality;
[5]The above data are typical values, not guaranteed values.
Modified Material
Film Blowing Grade YPMH-M300
Film Blowing Grade PLA Modified Material
PLA+PBAT+STARCH
Item Code: YPMH-M300
Recommended applications
Shopping vest bag, wrist bag, roll bag, food preservation bags; packaging film for electronic products, packaging film for home appliances, medical sanitary films, etc.
Product Features
1) Independent corn tachnology, high product strength, more than 30% higher than the tensile strength of conventional commercial products;
2) Good coloring performance, stable melt strength, and can be directly processed into various films;
3)It is usually light white, fragrant, easy to be decomposed by microorganisms, and has natural antistatic property;
4)The raw materials have good thermostability, good recyclability of leftover materials, and can withstand high temperature and strong shear force.
Material properties
| Item |
Test method |
Conditions for item |
Unit |
Result[1] |
| Melt flow rate |
1S0 1133 |
190ºC, 2.16kg |
g/10min |
3.0-6.0 |
| Density |
1S0 1183 |
23ºC |
g/cm3 |
1.38-1.43 |
| Melting point |
DSC |
-
- |
ºC |
110-130 |
[1]The above data are measured values, not guaranteed values.
Processing parameters
| Temperature |
Typical value[2] |
Reference range |
| Melting temperature |
|
125ºC |
120-130ºC |
| Temperature of film blowing heating area |
Posterior segment |
145ºC |
140-150ºC |
| Middle segment |
145ºC |
140-150ºC |
| Anterior segment |
150ºC |
140-150ºC |
| Mould head temperature |
|
150ºC |
140-150ºC |
| Upper limit of processing temperature |
|
190ºC |
|
[2]The above data are typical values and are only for reference. In the actual processing process, the parameters can be adjusted appropriately.
Typical film properties[3]
| Characteristics[4] |
Test method |
Conditions for testing |
Unit |
Typical value[5] |
| Tensile strength longitudinal/transverse |
1S0 527 |
25ºC |
MPa |
17/13 |
| Elongation at break longitudinal/transverse |
1S0 527 |
25ºC |
% |
300/500 |
| Dart impact |
1S0 7765-1 |
25ºC |
g
|
190 |
[3]Typical films are produced by film blowing mechanism with the material YPMH-M300, film thickness is 28 microns;
[4]The data are measured by the newly produced film and can not be used as the basis for judging material quality;
[5]The above data are typical values, not guaranteed values.
Product Display
Company Profile
What we do
Solution to replace petroleum plastics with polylactic acid materials and products
Polylactic acid material is 100% biodegradable and environmentally friendly. We have integrated PLA, PBAT and corn starch to produce film products and bag products, providing environmentally product solutions for the food industry and packaging industry.
Our Attitude
Honesty Integrity Trust and Dignity
01 Operational Excellence
Striving and achieving the best in all we do ensures we send the best to our partners.
02 Relationship Building
Establishing mutually beneficial & long term relationships with suppliers, clients and investors with honesty and integrity equates to long-term sustainability.
03 Customer Satisfaction
Everything we do is customer-centric, fully and efficiently meeting our customers' need is the base of our business, supplying much better quality & service than expected quality & service is our goal.
04 Innovation
At the forefront of technological advancements, from customers' feedback, to target market demand survey, to products' design from our technology department, finally to the new products' launch in the market, the whole circle time is very short.
FAQ
1. Q: What's your main material?
Our main materials are PLA,PBS,PBAT and Corn Starch. The materials are 100% Compostable and Biodegradable, they can be degraded into H20 and C20 completely.
2. Q: What information should I let you know if I want to get a quotation?
The size of the products (Length x Width), if your bag's have the gusset, also please provide the gusset size.
We usually quote you within 24 hours after we get your inquiry. If you are in urgency to get the quotation,please call us or tell us in your mail, so that we could regard your inquiry in priority.
3. Q: The printing: How many colors printing in 1 side or 2 sides?
It will be very useful if you can provide your bag's picture. Of course, samples will be best.
4. Q: What's your MOQ?
Usually 1 tons each kind, the more the cheaper.
5. Q: What is the bag size?
You can measure the length, width and height of the goods that need to packing, we will help you calculate the required size of the bag.
We do customized products, any size & any color we can make according to your requirement.
6. Q: Can you design for me?
According to your requirement, we can add your company logo, website, phone number or your ideas on the bag....
Any color is available. Our profession designer can make design it to for you for free.
Welcome to contact with us for more details!
){kind=link}